It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a two-part 1:1 epoxy resin kit: 4 oz of resin and 4 oz of hardener, plus two nozzle caps. It cures to a high-gloss, self-leveling clear finish and is stabilized against yellowing, with a working time of roughly 30 to 45 minutes and a full cure in 12 to 24 hours. It suits crafters pouring small pieces like coasters, sun catchers, jewelry and small art panels, where an 8 oz kit covers about 2 square feet. Against larger-bottle rivals it is a small, low-commitment kit; the trade-off is that pours must stay at 1/4 inch or thinner per layer to keep bubbles down and the finish clear.
In stockReturn policy
Buyers who used it on small craft projects report it works well and gives good results, including a butterfly project. The main complaint is that no instructions come with the kit.
This is a clear, high-gloss epoxy resin kit for art and craft projects. It comes as two parts, 4 oz of Part A resin and 4 oz of Part B hardener, for 8 oz (236 ml) in total. The formula is self-leveling and dries to a glass-like finish.
The resin is UV-resistant and HALS stabilized to protect against yellowing. It is low-odor, with no VOCs and no BPA, and it is non-toxic when mixed correctly. It can be used for resin pours, coating, molds, jewelry, crafts, woodwork and countertops.
Mix equal parts 1:1, stirring for 3-4 minutes and scraping the sides and bottom of the cup until the mix is clear with no swirls. For the fewest bubbles, mix slowly and pour each layer no thicker than 1/4 inch. Spraying 91% or higher isopropyl alcohol over the pour helps pop bubbles. Wear gloves and a mask or respirator, and work in a well-ventilated area.






