This is an 8-pack of SATA III data cables, each 50 cm (about 20 inches) long with a straight 7-pin female connector at both ends. They connect hard drives and SSDs to a SATA controller at transfer rates up to 6 Gbps.
The cables follow the SATA 3.0 standard and are backward compatible with SATA II (3 Gbps) and SATA I (1.5 Gbps) hardware. The 7-pin connectors are made for a firm fit with minimal signal loss, and the compact, flexible cable body bends and routes easily inside a chassis.
They are data cables only: separate SATA power cables or splitters are needed to power the drives. The cable supports hot-plugging when the operating system and SATA controller also have hot-swap mode enabled. Do not crease or fold a cable beyond its natural bending radius, to protect the internal copper shielding.
- Interface Standard
- SATA III (SATA 3.0)
- Max Transfer Rate
- 6 Gbps
- Connector Type
- 7-pin female to 7-pin female, straight
- Cable Length
- 50 cm / 20 inch
- Pack Quantity
- 8 cables per pack
- Compatibility
- Backward compatible with SATA II (3 Gbps) and SATA I (1.5 Gbps)
- Power
- Data only; separate SATA power cables or splitters required