
8mm 3-Wire CCT COB LED Strip
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a tunable-white COB LED strip on an 8mm-wide tape, wired with three conductors: a common positive plus separate warm and cool channels. Running both channels together mixes anywhere from 2700K warm white to 6500K daylight, and the COB layout at 576 LEDs per meter gives a continuous, dot-free line of light. CRI is rated 90+, which matters for wood, fabric and skin tones. It suits cabinet, shelf and cove lighting where a visible dotted strip would look bad and where the color temperature should be adjustable. Against single-color COB strips it adds tunable white at the cost of a three-wire controller; against standard SMD tunable strips it trades brightness per foot for a smoother, dot-free surface.
Availability unknownShips from China · duties may applyReturn policy
The 8mm 3-Wire CCT COB LED Strip is tunable white LED tape on an 8mm PCB. It runs on DC 24V and has 576 LEDs per meter, which read as a continuous, dot-free line. The color temperature adjusts from 2700K warm white to 6500K daylight, with a CRI of Ra ≥ 90.
The strip uses 3-wire CCT wiring: a common positive plus separate warm and cool channels. It connects to standard CCT controllers, including dimmers, wall panels, and smart WiFi or Zigbee controllers. Warm and cool channels can run together, so mid-range whites stay bright, and both channels at full give maximum output.
A full 5m reel draws about 100W with both channels at full, or up to 20W per meter; a 24V supply rated 125W or higher is recommended. Cut the strip only at the marked copper pads every 20.83mm, or 12 LEDs per segment. For runs longer than 5m, feed power at both ends to keep brightness even. It is used for kitchens, under-cabinet and shelf lighting, ceiling coves, offices, hospitality, and smart-home projects.




