Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Oregon 90PX052 is a 3/8-inch low-profile, .043-gauge replacement loop with 52 drive links, sized for 14-inch cutting bars. Its narrow kerf cuts a smaller slot in the wood, so small gas and battery saws keep higher RPMs and lose less power in the cut than they do with the standard 91PX system. That makes it a sensible pick for homeowners, arborists and landscapers running low-powered saws. It supersedes the 90PX052G and replaces R52, 90VG052G and 90SG052G loops.
In stockReturn policy
This Oregon AdvanceCut saw chain loop is made in the USA. It has a 3/8 low profile pitch, .043 gauge (1.1 mm) and 52 drive links, and it fits bars with a 14-inch cutting length. The 90PX052 supersedes the 90PX052G.
The smaller .043 gauge takes less power and cuts a narrower kerf. This lets the saw hold higher RPMs for more efficient cutting. The 90PX needs less power from the saw than the standard 91PX cutting system, so it suits small, low-powered gas and battery saws.
To check fit, look for a 90 stamped on the drive link and count 52 drive links. The bar should be stamped 52DL 3/8LP 043 or 1.1mm. The chain sharpens at 30 degrees with an 11/64" file.
