AB RVM-14 Elbit Systems Commercial White Phosphor

This Device

This configuration includes the AB Night Vision RVM-14 monocular, combined with Elbit Systems Gen 3 thin film commercial grade white phosphor image tubes, for a top tier value combining Gen 3 performance and a ruggedized monocular, perfect for future proofing yourself into an eventual dual tube setup.

Full kit includes complete panning RVM14 monocular, day caps and rubber eyepiece covers.

RVM-14 DETAILS

The RVM-14 monocular housing is billet machined from 7075 aircraft grade aluminum and designed to handle challenging real-world environments. The housing design accepts standard mil-spec PVS-14 lenses, or lightweight RPO lenses.

The monocular features a side mounting area to accept PVS-14 accessories and mounts with a standard ¼-20 thread. Two monos can also be attached to a bridge mount (RVM-14 Bridge) in a binocular configuration with the small dovetail incorporated into the top of the housing, or the dovetail can be used with the RVM-14 Arm for single mono use. Both the Arm and Bridge are articulating to lay back against the helmet when in the stowed position.

The monocular design features a rotary switch that doubles as gain adjustment. The switch initially turns the tube on at full brightness, then dims the MX-11769 image intensifier tube as the knob is rotated further. The unit includes an onboard infrared illuminator activated by a push button switch on the front of the unit. The button is surrounded by a protective fence to prevent accidental activation. Indicators on the edge of the viewing area show if the IR LED is actively on, or if the unit detects a low battery.

The weight of the unit with standard mil-spec lenses and a CR123 battery is 300 grams. The approximate battery life at room temperature is 75 hours. The RVM-14 weighs 15% less than a typical single AA PVS-14 with a 50% longer battery life and has a much tougher housing.

The monocular is available in Flat Black and Flat Dark Earth. The components of the monocular are media blasted to give a non-reflective matte finish, then black anodized for durability. For the FDE option, Cerakote, a proven firearms finish, is applied over the anodizing to give a tough, attractive finish.

Specifications:

POWER SOURCE: (1) CR123 SIZE BATTERY

FOCUS RANGE: 9.8” TO INFINITY

OPERATION TIME: APPROXIMATELY 75 HOURS AT ROOM TEMPERATURE

MAGNIFICATION: (1X) ONE POWER

FIELD OF VIEW: 40 DEGREES

DIOPTER ADJUSTMENT: -6 TO +2

EYE RELIEF: 25MM

WEIGHT: 300g

DIMENSIONS: 2.0” X 2.6” X 4.2”