
Achtek 4"x12" Air Supply Vent Cover in Cast Aluminum
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Achtek 4x12 is a cast aluminum air supply vent cover for a standard 4-by-12-inch duct opening. The face plate measures 5-1/2 by 13-3/4 inches with a beveled edge, and the black powder-coated steel louver needs about 2-1/2 inches of clearance to open fully. It drops into a floor opening so the plate sits on top of the floor, or screws to a wall or ceiling through two countersunk holes on the short side, with color-matched wooden screws included. Solid cast aluminum gives it a sturdier, heavier feel than stamped steel vents, though the handmade construction means size and thickness vary slightly from piece to piece.
In stockShips from Canada · duties may applyReturn policy
This is an air supply vent cover made to fit a standard 4" x 12" duct opening. The face plate measures 5-1/2" x 13-3/4" and has a beveled edge. It is made of solid cast aluminum with a powder coated matte finish.
The louver is black powder coated steel and needs 2-1/2" of free space to open fully in the vertical direction. Because the cover is handmade, slight variation in size and thickness can occur.
For floors, the cover drops in and the face plate sits proud, on top of the floor surface. For walls or ceilings, it has two countersunk screw holes on the short side of the plate; the installer secures it to structural framing or with anchors, which are not provided. Color matching wooden screws are included.
It checks today's price at every store, compares the alternatives and answers in about a minute.