The Adam's Swirl Killer MINI is a 12mm long throw dual-action polisher for spot correction. It is meant for small or hard-to-reach areas where a full-size machine won't fit, such as A, B and C pillars, curves around fog lights, rear spoilers, headlights, taillights, rocker panels, mirrors, clear coated wheels, door handles and tight emblems. It is not intended for paint correcting an entire vehicle. It works with Adam's 3.5" microfiber and foam polishing pads.
The 12mm throw oscillates the backing plate and pad in many directions several thousand times per minute, at up to 5500 OPM. The motion mimics the irregular circular pattern of polishing by hand. Most swirl mark removal can be done at speed 3 or 4 on the adjustable dial. Speeds 5 and 6 are for heavier scratches.
The large ON/OFF rocker switch means you don't have to hold in a trigger, and it has a soft start. The rubber hand grip above the polishing head reduces vibration. A hook and loop backing plate holds pads securely and still lets you remove them easily. The soft rubber power cord is 25 feet long and resists twisting and tangling. Backing plates should be changed once a year because the rubber degrades, regardless of use.
- Type
- Long throw dual-action orbital polisher
- Throw
- 12mm
- Backing plate
- 3 in (74mm)
- Pad size
- 3.5" pads
- Power
- Rated 500W (maximum 750W)
- Voltage
- 120-127V, 50/60Hz (UL/JP)
- Cord length
- 25 ft, soft rubber
- Weight
- 4-1/8 lbs
- Switch
- ON/OFF rocker switch with soft start
- Grip
- Rubber hand grip