
ADVANCE Waterborne Interior Alkyd Paint - Satin Finish 792
Best price now
58% under what the other stores charge
Compared across 4 stores. Prices are checked against each store and labelled with when.

58% under what the other stores charge
Compared across 4 stores. Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
ADVANCE Satin 792 is a waterborne alkyd enamel for interior cabinets, doors and trim. It flows and levels like an oil-based alkyd but cleans up with soap and water and carries little solvent odor. The cured film is hard and washable, with a satin sheen around 25–35 at 60°. It suits trim and cabinetry work where a smooth, durable finish matters more than a fast turnaround.
In stock
In stockReturn policy
In stockReturn policy
Availability unknown
ADVANCE Satin 792 is a waterborne alkyd enamel for interior woodwork: cabinets, doors and trim, and it also goes on walls and ceilings. It cures to a hard, furniture-quality film that resists blocking and stands up to repeated washing. The sheen is satin, a soft finish that downplays minor surface flaws and suits shaker cabinets and painted trim.
The alkyd resin is carried in water rather than mineral spirits, with titanium dioxide pigment and 38.4 ± 2% volume solids. The paint is non-flammable, stays under 50 grams per liter of VOC even after tinting, and cleans up with soap and water. It has the flow and leveling of a conventional alkyd without a heavy solvent odor, and it yellows less than traditional alkyds in low light.
Extended open time lets brush marks level out before the film sets, so cabinet doors and raised panels come out smooth. It resists spattering, sprays airless at 1,500 to 2,500 PSI with a .011 to .015 tip, or applies by HVLP. Keep surface temperatures between 50°F and 90°F while it dries. Full hardness and final sheen come in up to 30 days; wait five to seven days before putting shelves and tabletops back into service.