

Prices are checked against each store and labelled with when.
The Aestri 2 Channel RS485 Relay Module is a DC 12V controller board that switches two relay outputs over an RS485 serial bus. It offers selectable baud rates from 2400 to 115200 BPS, photoelectric-isolated NPN low-level inputs, and self-locking, interlocking and momentary modes, all in a DIN-rail shell with TVS surge protection. It suits hobbyists and integrators automating lights, pumps or gates from a PLC or microcontroller. Compared with bare relay boards, it adds isolation, surge protection and a housing, but it is serial-only, with no Wi-Fi or Ethernet, and needs a 12V supply and RS485 wiring.
In stockSold by HealthyPartnerReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
The Aestri 2 Channel RS485 Relay Module is a DC 12V relay controller board for switching signals and controlling electrical equipment over an RS485 connection. It has two relay outputs and photoelectric isolation input ports that are NPN low level active. The board comes in a protective shell.
The board runs on DC 12V and draws 13 mA on standby, or 69 mA with both relays open. Communication baud rates are selectable from 2400 to 115200 BPS, with 9600 BPS as the default. Parity can be set to none, even or odd, and up to 64 devices can be connected in parallel.
Relays can be set to self-locking, interlocking or instantaneous operation. A hardware reset and TVS anti-surge protection are built in. The board measures 60 by 72 by 19 mm and weighs 48.5 g; in its DIN rail box it measures 62 by 82 by 40 mm.
It checks today's price at every store, compares the alternatives and answers in about a minute.




