The AGF-322 is a digital inclinometer that works as an angle finder, protractor and level. It measures both absolute and relative angles. It can be used for setting miter, table and circular saw blade angles, setting up lathe tools, checking drainage angles and slopes, and aligning graders and tractors.
The frame is rugged aluminum alloy. The base has a V-groove and a powerful built-in magnet. A bright green LED display always reads upright. The unit is factory pre-calibrated and can be recalibrated easily.
Other functions include a HOLD function, a low battery indicator and a beeper that can be set. The reading unit can be changed between degrees, mm/m, percent slope and pitch in inches per foot.
- Working range
- 4 x 90° | 1000 mm/m | 100% | 12 in/ft
- Accuracy
- ±0.1° at 0° and 90°; ±0.2° at other angles
- Resolution
- 0.05°
- Units
- Degrees (°), mm/m, percent slope (%), pitch (in/ft)
- Display
- Bright green LED, always upright reading
- Measurement modes
- Absolute and relative angle
- Features
- HOLD function, low battery indicator, settable beeper, easy calibration
- Base
- V-groove with built-in magnet
- Frame
- Aluminum alloy
- Power
- 2 x AAA batteries
- Protection
- IP65
- Operating conditions
- 32–104°F (0–40°C), ≤85% humidity
- Dimensions
- Approx. 151 x 60 x 32 mm (L x W x H)
- Weight
- Approx. 263 g
- In the box
- 1 x digital level, 2 x AAA batteries, 1 x mini screwdriver, English user manual, carrying pouch