Free shipping on everything10% off your first orderNo account needed · Buy 2, save 10% · 3+, save 15%

Air Compressor Pressure Regulating Valve
This one just sold out
It was sold and shipped by Deal.ai. The store has more like it, with free shipping on everything.
See similar productsAsk our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Our take on the Air Compressor Pressure Regulating Valve
This is a pressure switch and regulator assembly for small air compressors: a black switch housing with a red reset button, a ribbed adjusting knob, two round dial gauges, brass fittings and a 1/4-inch quick-connect coupler. The switch is normally closed, rated 20A, and cuts out between 5 and 8 bar (90-120 PSI), with a box rating of 240V, 12 bar and 175 PSI. It suits people repairing or building a compressor who need a combined on/off switch and adjustable regulator with gauges. Against separate switch-and-regulator setups it saves plumbing and fittings, but it is a generic part with no brand support, and the dials and knob are the usual weak points on this class of assembly.
- Combines switch, regulator, two gauges and a quick coupler in one unit
- Adjustable cut-out range of 5-8 bar (90-120 PSI)
- 20A rating and normally closed contacts suit common small compressors
- Brass fittings and a 1/4-inch coupler included
- Rated for 80,000 switching cycles
About the Air Compressor Pressure Regulating Valve
This is an air compressor pressure regulating valve and pressure switch assembly. The rectangular switch housing has a red button on top, a ribbed adjusting knob, and two round dial gauges. Brass fittings and a silver quick-connect coupler attach to the assembly.
The switch uses a normally closed contact. Its switching pressure range is 0.5–0.8 MPa (5–8 bar; 90–120 PSI), and the working pressure is 5–8 kg. The switch box carries maximum ratings of 240V, 20A, 12 bar, and 175 PSI. The maximum current is 20A.
The exhaust pipe is 6 mm. The connector measures 12 mm (1/4 inch), and the pressure relief port has an outer diameter of 9.5 mm. The net weight is 635 g (1.4 lb), and the switch has a life of 80,000 times. The set includes one pressure switch.
- Type
- Pressure regulating valve / pressure switch assembly
- Contact method
- Normally closed
- Rated voltage
- 220/380V
- Switching pressure range
- 0.5–0.8 MPa (5–8 bar; 90–120 PSI)
- Working pressure
- 5–8 kg
- Maximum current
- 20A
- Max ratings
- 240V, 20A, 12 bar, 175 PSI
- Exhaust pipe
- 6 mm
- Connector size
- 12 mm, 1/4 inch
- Pressure relief port
- 9.5 mm outer diameter
- Life
- 80,000 times
- Net weight
- 635 g (1.4 lb)
Questions and answers
- Will this replace my compressor's existing pressure switch?
- Only if your compressor runs on 220V or 380V and draws no more than 20A, and your cut-out pressure falls within 5-8 bar. Check the old switch's rating and thread size before swapping.
- What is the difference between the 220V and 380V options?
- They are the same assembly with different switch coils for the supply voltage. Pick the one that matches your compressor's motor supply.
- Does it come with the gauges and coupler?
- The packing list states one pressure switch. The gauges, knob, brass fittings and quick coupler are part of the assembly, but small loose fittings shown alongside are not listed as included.
- How do I set the cut-out pressure?
- Turn the ribbed knob to adjust the spring tension; the switch trips within the 5-8 bar range. Verify the setting against the gauge and your tank's rating.
- Can it be used with a compressor larger than a small portable unit?
- Not safely. The 20A, 12 bar maximum suits small single-phase or light three-phase compressors, not large shop units.