Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The StrongTools Air Random Orbital Sander is a pneumatic dual-action sander that runs on compressed air at 90 psi and uses 5-inch or 6-inch pads. It has a self-vacuum setup that pulls dust into the pad and hose rather than scattering it. It suits body shops, metalworkers and serious DIY detailers who already own a compressor and an air line. Against electric DA sanders it is lighter and has no motor heat, but it needs a steady air supply, an FRL unit and regular oiling to keep its power.
In stockSold by Sun NewReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This is a dual-action pneumatic random orbital sander with a self-vacuum feature. It runs on compressed air and takes either a 5 inch or a 6 inch sanding pad. It can be used for sanding and polishing on cars or metal.
The body is made of aluminum alloy. A dust pipe and dust bag are included to collect dust while sanding.
It needs a clean, lubricated air supply that gives 6.2 bar (90 psi) at the tool with the lever fully depressed. It can run at lower pressures, but performance is reduced, and it should never run above 6.2 bar (90 psi). An air filter, regulator and lubricator (FRL) is recommended, and a pressure regulator should be used wherever the supply exceeds the tool's marked maximum. Without a lubricator, put 2 to 3 drops of pneumatic motor oil into the hose end of the tool, reconnect the air and run it slowly for a few seconds. Lubricate daily with frequent use, or whenever the tool slows or loses power.
