
AKD1500 Raspberry Pi 5 Dev Kit
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $1,295.00 at BrainChip Inc (checked Nov 18, 2026).

Prices are checked against each store and labelled with when.
A Raspberry Pi 5 with a BrainChip Akida AKD1500 neuromorphic accelerator on an M.2 B+M Key card, sold as a ready-to-run edge AI kit. The Pi 5 supplies the quad-core Cortex-A76, 8GB RAM, dual 4K HDMI and Gigabit Ethernet, while the Akida card handles event-based neural inference and on-chip learning. A pre-configured 32GB SD card with MetaTF and demos plus a USB-C supply means you boot and start prototyping without assembling anything. It suits engineers and researchers who want to try neuromorphic and Edge Impulse workflows on real hardware, not a general-purpose desktop.
In stockReturn policy
The AKD1500 Raspberry Pi 5 Dev Kit pairs a Raspberry Pi 5 single-board computer with an AKD1500 M.2 card for edge AI development. The board runs Linux with MetaTF pre-installed on a pre-configured 32GB SD card, and the kit includes a USB-C power supply.
The computer is built on a Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 SoC with a Broadcom VideoCore VII GPU at 800MHz and 8GB of LPDDR4 SDRAM. The AKD1500 card is pre-installed in the M.2 B+M Key slot and supports on-chip learning, so anomaly detection runs without a cloud connection. Dual 4Kp60 HDMI outputs with HDR, Gigabit Ethernet, Bluetooth 5.0, dual-band 802.11ac Wi-Fi, PCIe 2.0 x1 and two USB 3.0 ports are on hand, and storage uses MicroSD in SDR104 mode.
To start, plug in the USB-C power supply and let the device boot. Join the 'akida-devkit' Wi-Fi network from a phone or laptop and open http://10.42.0.1 in a browser with popups enabled, or connect an Ethernet cable to a switch or router and browse to http://<device_ip_address>, using the IP address your DHCP server assigns.
It checks today's price at every store, compares the alternatives and answers in about a minute.