This is a 3D printed statue of Alexstrasza, the Life-Binder from World of Warcraft. It is made from UV-cured photopolymer resin and printed with high-resolution resin 3D printing, up to 14K, to capture the detail of her armor. The material notes that some models may be reinforced for extra durability.
It comes either hand-painted or unpainted. The painted version is hand-painted and sealed with a matte and/or gloss varnish. The unpainted version is cleaned and cured, ready for priming and painting. An optional version with an alternate sculpt is also offered, and the version is chosen at checkout.
After printing, each piece is solvent washed, ultrasonic rinsed and UV-cured. Some models have drain holes. It is a fragile decorative item for display, made for adult collectors and hobbyists, and is not a toy. It is fan art and not officially affiliated with or endorsed by any IP owner.
- Material
- UV-cured photopolymer resin
- Print resolution
- Up to 14K resin 3D printing
- Finish options
- Hand-painted, or unpainted
- Painted finish
- Hand-painted, sealed with matte and/or gloss varnish
- Unpainted finish
- Cleaned and cured, ready for priming and painting
- Scale
- Varies by model; examples are 1/10 scale, about 18 cm tall excluding base, and 1/12 scale, about 15 cm
- Versions
- Standard, or optional version with an alternate sculpt
- Care (painted)
- Dust gently with a soft, dry brush. Avoid harsh chemicals and excessive moisture.
- Care (unpainted)
- Wash gently with warm soapy water and air-dry fully in a shaded area. A brief isopropyl alcohol soak can remove stubborn residue. Make sure it is fully dry before priming.
- Safety
- Adults only, not a toy. Wear goggles, gloves and a mask when sanding or drilling unpainted resin.
- Handling
- Fragile decorative item, intended for display
- Maker
- Minisforge