
Alphacool Core Geforce RTX 5080 / 5070Ti Reference with Backplate
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Alphacool Core is a full-cover water block for Nvidia GeForce RTX 5080 and 5070 Ti reference-design cards, sold with a matching aluminum backplate. Its cooling core is a single-piece milled copper block with a chrome finish, a brass terminal with nylon cover, and brass fittings, plus an acrylic top lit by aRGB. It suits custom-loop builders who want a low-profile, full-backplate block for a reference PCB rather than a stock air cooler. Against rival blocks it leans on the chrome-plated copper and full-length backplate, while the acrylic top and aRGB are the usual points of comparison.
In stockShips from Australia · duties may applyReturn policy
This is a water cooler for Nvidia GeForce RTX 5080 and 5070 Ti graphics cards, supplied with a matching backplate. The cooler body measures 160 x 124.07 x 34.19 mm and the backplate 160 x 124.07 x 6 mm. It is made for the Inno3D and MSI RTX 5070 Ti and RTX 5080 models listed under Compatibility.
The coolant block is milled from a single piece of copper with a chrome finish. It is topped with an acrylic panel, and the terminal is acetal with brass G1/4" threads. A Core emblem sits above the jetplate. The acrylic is combined with digital aRGB lighting: seven LEDs run on 5 V through a 3-pin JST connector.
The aluminum backplate covers the entire back of the copper cooler for a uniform appearance and is 3 mm thick without the spacers. The cooler is pressure tested to 0.8 bar and has a maximum working temperature of 60 °C. Use it only with clear, transparent water cooling fluid, as particles and additives in pastel fluids can clog and damage the cooler.
It checks today's price at every store, compares the alternatives and answers in about a minute.