
Alpine W10S4 Loaded Subwoofer Sub Box Enclosure
Best price now
Compared across 4 stores. Prices are checked against each store and labelled with when.

Compared across 4 stores. Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a preloaded bass package for the 1990–2005 Mazda MX-5 Miata: a sealed 0.8 cu ft enclosure built from 1/2-inch MDF with an Alpine W10S4 10-inch sub already installed. The sub handles 250 W RMS and 750 W peak, with a single 4-ohm voice coil, 86.6 dB sensitivity and response from 24 to 200 Hz. The box drops into the trunk on the driver's side with the sub facing the passenger side, so it fits the Miata's tight trunk without custom fabrication. It suits Miata owners who want added bass without building a box, though the sealed design trades some deep-output volume for tight, controlled bass, and the sub needs an external amp since it is passive.
In stockSold by HiFiSoundConnectionReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
In stockSold by HiFiSoundConnection
In stock
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Store links may earn us a commission.
Lowest price we've seen: $124.95 on Nov 16 at Walmart. Tracked across 3 stores since Nov 16.
This is a loaded subwoofer enclosure for the 1990–2005 Mazda MX-5 Miata. It pairs a sealed, carpeted box with a single 10-inch Alpine W10S4 subwoofer already mounted in it, and the assembly weighs 16.15 lb. The box installs in the trunk on the driver's side with the sub facing toward the passenger side.
The W10S4 is a single 4-ohm subwoofer with a 2-inch voice coil, rated at 250 W RMS and 750 W peak. Its frequency response is 24 to 200 Hz with 86.6 dB sensitivity and 10 mm of Xmax. The cone is mica-injected polypropylene with a poly-foam surround. A grille is not included; the Alpine KTE-10PG is an optional accessory sold separately.
The enclosure is built from 1/2-inch MDF and covered in black carpet, with a spring-loaded terminal cup that takes bare wire up to 10 gauge. It provides 0.8 cubic feet of air space in a shared chamber and has a mounting depth of 4 1/2 inches. Its outside dimensions are 17 1/2 inches wide by 10 inches high, with a top depth of 4 1/2 inches and a bottom depth of 10 3/4 inches.













