How long does it take to recharge from the wall?

About 49 minutes at 1,600W with HyperFlash enabled in the Anker app. Without the app or on a lower-output outlet, it takes longer.

Can the PS200 panel recharge it fully?

Yes, but one 200W panel is slow. The 1.8-hour figure assumes up to 600W of solar, so you need several panels to reach it.

What can the 2,000W output run?

Fridges, routers, lights, laptops, phones, fans and most small appliances. Motors and heaters that spike above 3,000W will trip it.

How long will the battery last?

Anker rates the LFP cells to keep at least 80% capacity after 4,000 cycles, roughly a decade of daily use.

What comes in the box?

The C1000 Gen 2 station, the PS200 200W solar panel, an AC charging cable, a quick start guide and the safety and warranty card.

Is the solar panel waterproof?

The PS200 is rated IP67, so it handles rain and dust. The power station itself is not meant to be left out in the weather.

Anker Solix C1000 Gen 2 Portable Power Station 200W Bifacial Solar Panel

Q: Where is the Anker Solix C1000 Gen 2 Portable Power Station 200W Bifacial Solar Panel cheapest?

At Anker SOLIX, for $849.99, as of our latest check.

Best price now

$849.99at Anker SOLIXChecked Nov 10

Prices are checked against each store and labelled with when. Store links may earn us a commission. Price via Klarna.

Visit Anker SOLIX

What reviewers say

Owners of the C1000 Gen 2 praise its fast recharging, quiet operation and compact build, and the PS200 panel is well regarded for its efficiency and weather sealing. Complaints center on the app requirement for HyperFlash and on solar recharge being slower with a single 200W panel.

What people mention

Recharge speedPraisedOwners say wall recharging is quick and solar input is strong when several panels are connected.
AppMixedSome like the monitoring and HyperFlash toggle; others dislike needing the app for full charging speed.
PortabilityPraisedUsers find the station light and small enough to move between car, tent and home.
Solar panelPraisedThe PS200 is called efficient and sturdy, and its waterproof rating is valued outdoors.
Solar rechargeCriticisedWith only the included 200W panel, a full recharge takes much longer than the headline figure.
Peak outputMixedHigh-draw tools and appliances can exceed the brief 3,000W peak and shut the output down.

About the Anker Solix C1000 Gen 2 Portable Power Station 200W Bifacial Solar Panel

This bundle pairs the Anker Solix C1000 Gen 2 portable power station with the PS200 200W bifacial solar panel. The power station has a 1,024Wh capacity and 2,000W output, with a 3,000W peak. It powers up to 10 devices through its 10 ports.

The power station accepts up to 600W of solar input (60V max) and recharges fully in 1.8 hours. With HyperFlash technology enabled in the Anker app, it recharges at 1,600W in 49 minutes. The battery keeps at least 80% capacity after 4,000 cycles. The power station is 14% smaller and 11% lighter than similar models.

The PS200 solar panel uses monocrystalline cells with up to 23% conversion efficiency. It has an IP67 waterproof design.

Capacity

1,024Wh

Output

2,000W, 3,000W peak

Ports

Up to 10 devices via 10 ports

Solar input

Up to 600W (60V max); full recharge in 1.8 hours

Fast recharge

1,600W in 49 minutes with HyperFlash, enabled in the Anker app

Battery life