Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Anker SOLIX C1000 Gen 2 is a 1,024Wh portable power station paired with a 100W bifacial solar panel. It delivers 2,000W continuous and 3,000W peak across 10 ports, and its HyperFlash mode recharges the battery in about 49 minutes from a wall outlet when enabled in the Anker app. Solar input accepts up to 600W, so a full recharge from panels takes roughly 1.8 hours at that input. The LiFePO4 battery is rated to hold at least 80% capacity after 4,000 cycles, and the unit is smaller and lighter than comparable 1kWh stations. It suits home backup, camping and van use; rivals in this class often charge slower or weigh more, though the bundled 100W panel alone is a modest solar source for a 1kWh battery.
In stockReturn policy
Owners of the C1000 line praise the fast wall recharge, the LiFePO4 longevity and the port selection for backup and camping. Common complaints center on app dependence for top charging speed and on the modest output of small bundled solar panels.
The Anker SOLIX C1000 Gen 2 is a portable power station with a 1,024Wh capacity. It delivers 2,000W of output, with a 3,000W peak, through 10 ports, so up to 10 devices can be plugged in at once. It comes with a 100W bifacial solar panel.
It can take up to 600W of solar input (60V max) and recharge fully in 1.8 hours. With HyperFlash technology, it recharges at 1,600W and reaches full in 49 minutes. HyperFlash is enabled in the Anker app.
The battery keeps at least 80% of its capacity after 4,000 cycles. The solar panel is IP67 rated, so it is protected from rain.
