

The Antron A-99 is a fiberglass vertical base station antenna about 18 feet tall that covers the 10- and 11-meter bands, so it works for CB radio and for 10-meter amateur use. It is a half-wave end-fed design with no ground radials, which makes it one of the simplest base antennas to put up: a mast, a mount and coax are all it needs. Owners rate it highly for easy tuning and steady performance, and it is the usual first base antenna for CB operators. Compared with aluminum beams and multi-band verticals it gives up gain and directionality, but it costs far less effort to install and needs no rotator.
In stockShips from Canada · duties may applyReturn policy
Owners with 21 ratings average 4.4 out of 5 and mostly praise how easy it is to assemble and tune, and how well it holds up outdoors. Complaints center on the need for a separate mast and mount and on modest performance compared with larger antennas.
The Antron A-99 is a base station antenna for the 11-metre CB band and the 10- and 12-metre amateur bands. It uses a 1/2 wave over 1/4 wave ground plane design and radiates omni-directionally, with a low angle of radiation for long-distance contacts. Its tunable frequency range is 25 to 30 MHz.
Three 6-foot fiberglass sections screw together into an 18-foot antenna, about 17.5 feet once assembled. Dual tuning rings at the base set the SWR: loosen them, adjust and tighten, with no cutting or trimming. The antenna handles up to 2000 watts PEP.
Out of the box it is set up for 11-metre CB use and can be tuned for 10 and 12 metres; transmitting on those amateur bands requires a valid Amateur Radio Operator Certificate. The feed point is an SO-239 (UHF female) connector, and a mounting bracket and hardware kit are included.
It checks today's price at every store, compares the alternatives and answers in about a minute.








