This is a single-handle bathroom sink faucet with a square, contemporary design and clean lines. It has a brass body with an oil rubbed bronze finish that resists rust in humid environments.
A single lever controls both water temperature and flow rate. The maximum flow rate is 2.2 GPM at 60 PSI. The ceramic cartridge is rated for 500,000 openings and closings.
A square nut allows tool-free installation. The faucet works with an under-mount sink, a 1-hole or 3-hole deck-mount sink, a wall-mount sink or a pedestal sink. On a 3-hole sink, a deck plate is needed and is not included.
- Body material
- Brass
- Finish
- Oil rubbed bronze
- Handle
- Single lever, hot and cold
- Cartridge
- Ceramic, rated for 500,000 openings and closings
- Max flow rate
- 2.2 GPM at 60 PSI
- Water pressure
- 60 PSI
- Water temperature
- 5 to 71 °C
- Overall size
- 2 1/16" W x 6 11/16" D x 6 11/16" H (5.3 x 17 x 17 cm)
- Spout height
- 4 5/16" (11 cm)
- Spout reach
- 3 1/4" (8.2 cm)
- Height above deck
- 6 11/16" (17 cm)
- Hose size
- 3/8" dia. x 21 7/16" L (1 x 54.5 cm)
- Hose fitting
- 1/2" (1.3 cm) inner diameter
- Mounting thread
- 1 1/4" dia. x 2 7/16" L (3.2 x 6.2 cm)
- Deck thickness
- 3/16" to 1 15/16" (5 mm to 50 mm)
- Mounting hole
- 1 1/4" to 1 1/2" (31 to 38 mm) diameter, pre-drilled
- Compatibility
- Under-mount sink, 1 or 3-hole deck-mount sink, wall-mount sink, pedestal sink
- Installation
- Tool-free with square nut
- Certifications
- cUPC, NSF
- Warranty
- 5 years
- In the box
- 1 faucet, 1 manual