This is a 3D-printed riser with casters for the Arcade1UP Infinity Game Table. It raises the table by about 4 inches and lets it roll on 2-inch rubber casters. The table itself is not included.
Each riser is printed to order in PLA+ or PETG, depending on the color. Brass heat inserts and steel casters are used in the build. Because of the 3D printing process, minor surface imperfections and slight variations in texture, color, or layer lines are normal. These don't affect fit, strength, or function.
Installation needs no drilling. Place the riser over the original rubber foot, attach the top, and secure it with the included screws. A Phillips screwdriver is the only tool needed, and detailed instructions are included. An optional power adapter mount is available. It clips to the base leg next to the caster mount and has 8 cord clips for cable management.
- Compatibility
- Arcade1UP Infinity Game Table (not the tabletop version)
- Requirements
- Original legs and rubber feet must be intact
- Height added
- About 4 inches (Tall version)
- Casters
- 2-inch rubber casters, steel
- Material
- PLA+ or PETG, depending on color; brass heat inserts
- Colors
- 30+ colors
- Installation
- No drilling; Phillips screwdriver needed
- In the box
- Riser, casters, screws, detailed instructions
- Optional add-on
- Power adapter mount with 8 cord clips, clips to the base leg
- Not included
- Arcade1UP Infinity Game Table
- Care
- Wipe with a damp cloth; don't soak
- Heat
- PLA+: avoid 100°F+ and direct sunlight. PETG: more heat-tolerant