Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
Replacement parts for the lightguns in Arcade1Up Big Buck Hunter, T2 and Time Crisis cabinets. The parts target the common failures on these guns, such as the USB cable and the internal electronics, rather than selling complete new guns. They are made in small batches, with handmade USB cables and custom electronics bought in tiny quantities. This suits owners of a working cabinet whose gun has failed and who want to repair it instead of replacing the whole unit; for Big Buck Hunter, a full GRS Sinden shotgun is offered as an alternative.
In stockReturn policy
These are replacement parts for the lightguns in Arcade1Up Big Buck Hunter, Terminator 2 (T2) and Time Crisis cabinets. The parts are main USB cables and USB cameras. They are not complete lightgun units for T2 or Time Crisis. The USB cables are handmade, and the cables and cameras are modified by hand.
Big Buck Hunter comes in two hardware generations. In Generation 1, the main USB cable connects to a small PCB with a USB hub. One hub output goes to a USB camera and another goes to a keyboard chip, which the trigger and pump action buttons connect to. The trigger sends the keyboard key "a" and the pump action sends "b". Player 2 uses "c" and "d".
Big Buck Hunter Generation 2, Terminator 2 and Time Crisis share the same hardware. A main USB cable connects to a camera module, and a small PCB on the camera module provides the button presses. For these, the camera and USB cable are sold as a pair. If the lightgun is the only one connected after the cabinet boots, it should move the cursor.
