What is the difference between the spindle and belt modes?

The spindle oscillates vertically and spins for sanding curves, contours and inside cuts. The belt runs horizontally at up to 1575 feet per minute for edges, faces and straight stock.

What sanding sleeves come with it?

Five sleeves: 1/2, 3/4, 1, 1-1/2 and 2 inches. A 4 x 24-inch belt is also included.

Can it sand bevels and angled edges?

Yes. The table tilts from 0 to 45 degrees, so you can set an angle and sand bevels or chamfers against the spindle or belt.

Does it need a dust collector?

It has a 1-17/32-inch dust port. A shop vacuum or dust collector with a matching hose keeps the workspace clear; without one, dust escapes.

Is it a good choice over a dedicated spindle sander?

It adds belt sanding for edges and faces that a spindle-only machine cannot do, in one footprint. A dedicated spindle sander with a larger motor will handle heavier stock removal better.

What is the oscillation rate?

58 oscillations per minute with a 5/8-inch stroke, and spindle speed up to 2000 RPM.

AsterOutdoor 2-in-1 Vertical Oscillating Spindle and Belt Sander

Best price now

$220.13at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

AsterOutdoor 2-in-1 Vertical Oscillating Spindle and Belt Sander

Best price now

$220.13at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $220.13 at Walmart on Nov 9.

Our take on the AsterOutdoor 2-in-1 Vertical Oscillating Spindle and Belt Sander

The AsterOutdoor 2-in-1 is a benchtop sander that pairs a vertical oscillating spindle with a 4 x 24-inch belt in one machine. Its 500W motor drives the spindle at 58 oscillations per minute with a 5/8-inch stroke and up to 2000 RPM, while the belt runs up to 1575 feet per minute. The tilting table goes from 0 to 45 degrees for angled work, and five sleeves from 1/2 to 2 inches cover tight curves up to broad contours. It suits hobbyists and small shops that want both curve and edge sanding without buying two machines, though it is a light-duty unit next to dedicated floor-standing spindle sanders.

Best forHobbyist and home woodworkersSmall shops short on bench spaceSanding curves, contours and inside cutsEdge and face sanding on straight stock

Pros

Two sanders in one benchtop footprint
Five spindle sleeves from 1/2 to 2 inches included
Oscillating spindle with 5/8-inch stroke reduces burning
Table tilts 0 to 45 degrees for angled work
1-17/32-inch dust port for a collector

Cons

500W motor is modest for hardwoods and long sessions
Belt speed is not variable
No stand or mobile base included
Oscillation rate of 58 OPM is low for aggressive stock removal

AsterOutdoor 2-in-1 Vertical Oscillating Spindle and Belt Sander prices at every store

WalmartNew
In stock
$220.13Checked Nov 9
Visit Walmart

About the AsterOutdoor 2-in-1 Vertical Oscillating Spindle and Belt Sander

This 2-in-1 sander combines a vertical oscillating spindle sander and a belt sander in one machine. It has a steel frame with a black finish and is powered by a 500W motor.

The spindle oscillates at 58 oscillations per minute with a 5/8-inch stroke. Belt speed reaches up to 1575 feet per minute, and spindle speed reaches up to 2000 RPM. The tilting table adjusts from 0 to 45 degrees for angled sanding and precision work on curves and contours.

A 1-17/32-inch dust port connects to a dust collection system. The sander comes with five sanding sleeves and a 4 x 24-inch sanding belt.

Type: 2-in-1 vertical oscillating spindle and belt sander
Frame: Steel
Finish: Black
Motor: 500W
Oscillation rate: 58 OPM
Stroke: 5/8 inch
Belt speed: Up to 1575 feet per minute
Spindle speed: Up to 2000 RPM
Table tilt: 0 to 45 degrees
Dust port: 1-17/32 inches
Sanding belt: 4 x 24 inches
Sanding sleeves: 5 sleeves: 1/2, 3/4, 1, 1-1/2 and 2 inches

Specifications

color: BlackSource

Questions and answers

What is the difference between the spindle and belt modes?: The spindle oscillates vertically and spins for sanding curves, contours and inside cuts. The belt runs horizontally at up to 1575 feet per minute for edges, faces and straight stock.
What sanding sleeves come with it?: Five sleeves: 1/2, 3/4, 1, 1-1/2 and 2 inches. A 4 x 24-inch belt is also included.
Can it sand bevels and angled edges?: Yes. The table tilts from 0 to 45 degrees, so you can set an angle and sand bevels or chamfers against the spindle or belt.
Does it need a dust collector?: It has a 1-17/32-inch dust port. A shop vacuum or dust collector with a matching hose keeps the workspace clear; without one, dust escapes.
Is it a good choice over a dedicated spindle sander?: It adds belt sanding for edges and faces that a spindle-only machine cannot do, in one footprint. A dedicated spindle sander with a larger motor will handle heavier stock removal better.
What is the oscillation rate?: 58 oscillations per minute with a 5/8-inch stroke, and spindle speed up to 2000 RPM.
Where is the AsterOutdoor 2-in-1 Vertical Oscillating Spindle and Belt Sander cheapest?: At Walmart, for $220.13, as of our latest check.