What nozzle and bed temperatures should I use?

The spool lists 190–220°C nozzle and 60–80°C bed. Most PETG prints better near the top of that range or slightly above, so start around 230–240°C if layers bond poorly.

Is it as easy to print as PLA?

No. It is tougher and more heat resistant than PLA but strings more and wants a heated bed at 60–80°C and speeds of 30–70mm/s.

How does it compare with ABS?

PETG shrinks far less and prints with little odor, so it is easier for large flat parts. ABS still takes higher temperatures.

What is on the spool?

1kg of 1.75mm filament with ±0.02mm diameter tolerance, vacuum sealed with desiccant. The spool is 200mm across with a 50mm center hole.

Does it work for light-diffusing parts?

Yes. Natural PETG is translucent, and the maker names light diffusion as a good use.

ATARAXIA ART PETG Filament 1.75mm 1kg Light Brown

Best price now

$15.35at WalmartChecked Nov 4

Prices are checked against each store and labelled with when.

Visit Walmart

ATARAXIA ART PETG Filament 1.75mm 1kg Light Brown

Best price now

$15.35at WalmartChecked Nov 4

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $15.35 at Walmart on Nov 4.

Our take on the ATARAXIA ART PETG Filament 1.75mm 1kg Light Brown

ATARAXIA ART PETG is a 1.75mm filament on a 1kg spool, sold in 14 Pantone-matched colors. PETG sits between PLA and ABS: tougher and more heat resistant than PLA, with far less shrinkage and odor than ABS. The stated 190–220°C nozzle range is lower than most PETG brands recommend, so expect to print hotter than the label says. Rated 3.5 out of 5 from 11 ratings, it is a budget-priced option for makers who want durable, slightly flexible parts.

Best forHobbyists printing functional partsImpact-resistant brackets and enclosuresMakers moving up from PLAParts that need mild heat resistance

Pros

Tough and slightly flexible, good for parts that take knocks
Low shrinkage compared with ABS
Little odor while printing
14 Pantone-matched colors
Vacuum sealed with desiccant
Density 1.27 g/cm3, typical for PETG

Cons

Stated 190–220°C nozzle range is low for PETG; many users will need to print hotter
Only 11 ratings, so the track record is thin
PETG strings and oozes more than PLA
Needs a 60–80°C bed and slower speeds of 30–70mm/s
Natural PETG is translucent, so color can look different on thin walls

ATARAXIA ART PETG Filament 1.75mm 1kg Light Brown prices at every store

WalmartNew
Availability unknown
$15.35Checked Nov 4
Visit Walmart

ATARAXIA ART PETG Filament 1.75mm 1kg Light Brown price history

Lowest price we've seen: $15.35 on Nov 4 at Walmart. Tracked across 1 store since Nov 4.

What reviewers say

3.5 / 511 ratings

Few ratings so far, averaging 3.5 out of 5. Buyers treat it as a workable budget PETG rather than a standout.

What people mention

Print settingsMixedThe listed nozzle range runs cooler than most PETG guidance, so users report tuning temperature upward.
StrengthPraisedOwners describe prints as tough and impact resistant.
StringingCriticisedSome report stringing and oozing that needs retraction tuning.
Color rangePraisedThe 14 Pantone-matched colors are a draw for makers.
ValueMixedBuyers see it as a budget PETG that works with some tuning.

About the ATARAXIA ART PETG Filament 1.75mm 1kg Light Brown

This is a 1.75 mm PETG (polyethylene terephthalate glycol-modified) filament for 3D printers, sold as a 1 kg spool in Light Brown. It combines the strength, flexibility, temperature resistance and durability of PETG with the easy printing of PLA. It is an alternative to PLA and ABS.

The filament has low shrinkage and a smooth surface finish. It is formulated for durability, heat resistance and chemical resistance, and suits impact-resistant parts. The spool is vacuum sealed with desiccant.

Material: PETG (polyethylene terephthalate glycol-modified)
Color: Light Brown
Diameter: 1.75 mm
Dimensional accuracy: ±0.02 mm
Weight: 1 kg (2.2 lb)
Nozzle temperature: 190–220°C (374–428°F)
Bed temperature: 60–80°C
Print speed: 30–70 mm/s
Density: 1.27 g/cm³
Spool size: 200 mm outer diameter x 50 mm inner hole diameter x 70 mm height
Packaging: Vacuum sealed with desiccant

Specifications

Color: Petg Gray
Weight: 2.2 lb heavy

Questions and answers

What nozzle and bed temperatures should I use?: The spool lists 190–220°C nozzle and 60–80°C bed. Most PETG prints better near the top of that range or slightly above, so start around 230–240°C if layers bond poorly.
Is it as easy to print as PLA?: No. It is tougher and more heat resistant than PLA but strings more and wants a heated bed at 60–80°C and speeds of 30–70mm/s.
How does it compare with ABS?: PETG shrinks far less and prints with little odor, so it is easier for large flat parts. ABS still takes higher temperatures.
What is on the spool?: 1kg of 1.75mm filament with ±0.02mm diameter tolerance, vacuum sealed with desiccant. The spool is 200mm across with a 50mm center hole.
Does it work for light-diffusing parts?: Yes. Natural PETG is translucent, and the maker names light diffusion as a good use.
Where is the ATARAXIA ART PETG Filament 1.75mm 1kg Light Brown cheapest?: At Walmart, for $15.35, as of our latest check.
What do buyers say about the ATARAXIA ART PETG Filament 1.75mm 1kg Light Brown?: Rated 3.5 out of 5 from 11 ratings.