The AudioControl EPIC750 is a Class D monoblock amplifier rated at 750 watts RMS. It is built to drive subwoofers in a compact, thermally efficient chassis and is stable down to a 1 ohm load. Its idle current draw is low, under 0.5 to 1 amp.
The amplifier has a 12 dB/octave Linkwitz-Riley variable low pass filter and a 12 dB/octave variable subsonic filter. EPICBoost provides a variable bass boost of 0 to 12 dB, with a control to select the boosted frequency. An ACR-E remote level control is included. The power and speaker terminals are direct-wire types with hex screws, sized for 4 AWG power wire and 8 AWG speaker wire.
A smart auto-reset protection circuit guards against output over-current, input over-voltage, input under-voltage, output DC offset and over-temperature. The Epicenter Link lets the amplifier connect directly to an Epicenter bass restoration processor, which is sold separately.
- Type
- Class D monoblock amplifier
- Power
- 750 W RMS
- Load stability
- Stable to 1 ohm
- Line inputs
- 500 mV to 12 V RMS
- Frequency response
- 10 Hz to 190 Hz (±1 dB)
- Low pass filter
- 12 dB/octave Linkwitz-Riley, 40 Hz to 180 Hz
- Subsonic filter
- 12 dB/octave Linkwitz-Riley, off to 50 Hz
- Signal-to-noise
- 92.2 dBA, ref. 300 W at 4 ohms
- Wire and fuse
- 4 AWG power/ground, 8 AWG speaker, 80 A fuse
- Dimensions
- 6.1" W x 8.62" L x 2.01" H