
Axminster Workshop Table Insert For AW216TS Table Saw
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a thin-slot table insert for the Axminster AW216TS and AC216TS table saws. Its 4.2mm slot is only as wide as the blade kerf, so thin strips and offcuts cannot drop down beside the blade, and it reduces tearout on crosscuts. It is meant for vertical (90-degree) cuts only, so it is a dedicated accessory rather than a replacement for the standard insert. The alloy body means a light graze from the blade during first fitting does no harm to the blade.
In stockShips from the UK · duties may applyReturn policy
The Axminster Workshop Table Insert is an optional table insert for the AW216TS and AC216TS table saws. It has a thin 4.2 mm slot and is used with the saw blade set at vertical only.
The insert is designed to stop material going down past the blade when cutting thin strips. It also helps prevent tearout of the grain on crosscuts. The slot is just wide enough for the blade kerf.
For first-time fitting, set the blade at its lowest position and fit the insert. Switch the saw on, then raise the blade slowly to full height. The insert is made of alloy, so if it catches the blade slightly there will be no damage to the blade.