This is the 2025 CAN-bus version of the BAFANG BBS02B mid-drive motor (model MM G340.750.C). It is a 48V, 750W mid motor that fits a bottom bracket 68 to 73 mm wide. It supports 20 to 29 inch wheels.
The controller is upgraded. The battery cable uses an XT60 connector, like the UART version, plus a new battery communication cable. With a BAFANG battery that has communication and a BAFANG display, battery data such as temperature, total and remaining capacity, cycle count, discharge time and cell voltage can be viewed on the display or in the BAFANG GO+ App. With other batteries, the communication cable is not used and the experience is the same as UART.
The new 1T4 cable lets the thumb throttle respond more accurately: the deeper it is pressed, the more assist it gives. The display speed limit applies in both throttle mode and PAS mode. The upgraded speed sensor collects speed data more accurately for smoother power. The gear sensor is the same as on the UART version. A rear light cable is added, so the rear light no longer has to be welded to the front light.
- Model
- MM G340.750.C
- Motor position
- Mid motor
- Version
- 2025 CAN-bus
- Nominal voltage
- 48 V DC
- Rated power
- 750 W
- Speed limit
- 45 km/h
- Max torque
- 100 N.m (max effective)
- Wheel size
- 20 to 29 inches
- Bottom bracket
- 68 to 73 mm; a 73 mm screw pack and spacers are available as options for widths other than 68 mm
- Pedal sensor
- Cadence sensor
- Shaft standard