
Bambu Lab - 3 AMS 2 Pro + Adaptateurs
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $713.47 at Atome3D Imprimante 3D France (checked Nov 17, 2026).

Prices are checked against each store and labelled with when.
This is a bundle of three Bambu Lab AMS 2 Pro filament management units plus the 4-in-1 PTFE adapter and three switching adapters. The AMS 2 Pro holds four spools per unit, so three units give a 12-spool setup with automatic material switching and built-in filament drying. It suits owners of Bambu printers who run multi-color or multi-material jobs and want drying without a separate dryer. Compared with the original AMS, the 2 Pro adds active drying and a switching adapter for X1/P1 power; A1 and A1 mini support arrives through a later firmware update, and H2D owners can power it directly.
In stockShips from France · priced in EUR (€647.79) · duties may applyReturn policy
Owners of Bambu printers rate the AMS 2 Pro as a solid upgrade over the original AMS, mainly for the added drying and reliable automatic switching. Complaints center on the A1/A1 mini compatibility delay and the extra adapter needed on X1 and P1 machines.
This pack includes three Bambu Lab AMS 2 Pro units, one 4-in-1 PTFE Adapter, and three AMS 2 Pro Switching Adapters. The AMS 2 Pro provides active-ventilation filament drying at 65°C and airtight storage. It is designed to print up to 24 colors or materials with six AMS 2 Pro units.
A brushless servo feed motor and RFID filament synchronization manage filament. During drying, the filament spools rotate automatically for more even drying, and automatic ventilation helps dehumidify during drying. Filament tubes are accessible from the top without tools, and the ceramic filament inlets have a Vickers hardness of 1200.
For X1/P1 printers, the AMS 2 Pro Switching Adapter is needed to power the drying function. The H2D can power any connected AMS 2 Pro for drying, and an adapter is not needed if multiple AMS 2 Pro units will not be run simultaneously for drying. Compatibility with A1/A1 mini printers is added through an OTA update in Q3 2025; filament drying for these machines is implemented through an OTA update by the end of April.
It checks today's price at every store, compares the alternatives and answers in about a minute.