The Bambu Lab 3D Effect Build Plate transfers a surface texture into the first layer of a part while it prints. The pattern is already on the bottom of the part when it comes off the plate, with no post-processing, painting or decals. It is built on Bambu Lab's spring steel plate format, so parts are removed by flexing the plate. The effect layer bonds to the steel without interfering with the magnetic adhesion or thermal behavior of the heatbed.
Four textures are available. Galaxy gives a rainbow iridescence that shifts color with viewing angle. Starry gives a rainbow kaleidoscope star pattern with color-angle glitter. Diamond gives a faceted grid of alternating glossy and matte shapes. Carbon Fiber gives a subtle, directional woven texture that is most visible in gray tones.
Galaxy, Starry and Diamond are designed for silk, shiny or metallic PLA. Matte PLA still transfers the pattern, but the iridescent shift needs a reflective filament surface. Carbon Fiber pairs with matte or CF-blend PLA. The effect sheet is a consumable surface, so printing in different zones of the plate across sessions spreads out wear.
- Textures
- Galaxy, Starry, Diamond, Carbon Fiber
- Size (X1, P1, A1, P2S, X2D)
- 10.1" × 10.1" / 256 × 256 mm
- Size (A1 Mini)
- 7.1" × 7.1" / 180 × 180 mm
- Compatibility
- X1, X1C, X1E, P1P, P1S, A1, P2S, X2D (256 mm size); A1 Mini (180 mm size)
- Base
- Bambu Lab spring steel plate format, flex-and-pop part removal
- Best filament
- Galaxy, Starry, Diamond: silk, shiny or metallic PLA. Carbon Fiber: matte or CF-blend PLA
- Slicer plate type
- Smooth PEI Plate or High Temp Plate in Bambu Studio
- Recommended temps
- PLA 60–65°C; TPU 35–45°C
- LIDAR
- Disable LIDAR calibration in Bambu Studio with this plate installed, or calibrate with a standard plate first and save the values
- Care
- Clean with hot water and detergent. Do not use isopropyl alcohol or glue stick. Use a scraper at a shallow angle with controlled force