The Bambu Lab AMS 2 Pro is a multi-material filament system with built-in filament drying and airtight storage. It dries filament with active ventilation at 65°C. Up to 6 AMS 2 Pro units can be used together to print with up to 24 colors or materials.
It has a brushless servo feed motor and RFID filament synchronization. The automatic vent helps remove moisture during drying. The spools rotate automatically while drying so the filament dries more evenly. The filament inlets are ceramic with a Vickers hardness of 1200.
The filament tubes can be reached from the top without tools. On the first-generation AMS, clearing broken filament means removing all the spools and taking off the shell by removing two screws, which takes 3 to 5 minutes.
- In the box
- 1 x Bambu Lab AMS 2 Pro, 1 x AMS 2 Pro switching adapter (power adapter)
- Dimensions
- 372 x 280 x 226 mm
- Net weight
- 2.5 kg
- Housing
- ABS/PC
- Drying
- Active ventilation at 65°C, with automatic spool rotation
- Capacity
- Up to 24 colors or materials with 6 AMS 2 Pro units
- Feed motor
- Brushless servo
- Filament inlets
- Ceramic, Vickers hardness 1200
- Filament sync
- RFID
- Filaments
- PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF, PAHT-CF, PETG-CF, Support for PLA/PETG, and TPU for AMS
- Power
- X1/P1: switching adapter required for drying. H2D: powered by the printer, adapter not needed unless drying with several units at once
- Compatibility
- X1, P1, H2D. A1 and A1 mini support is to be added by OTA update in Q3 2025, with drying for these printers by OTA update by the end of April