
Bambu Lab AMS 2 Pro Kit série X1 et série P1 Version Hub
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
This is a bundle that adds a second-generation automatic material system to a Bambu Lab X1 or P1 printer. The AMS 2 Pro holds four spools and adds active filament drying, which the original AMS could not do. The kit includes the four-pin cable, the AMS Hub, three PTFE tube connectors and a switching adapter, so the unit can be powered for drying on X1 and P1 machines. It suits owners who print with PETG, TPU or damp-prone filament and want fewer moisture-related failures; the trade-off is that drying needs the adapter on X1/P1, while H2D owners can draw power from the printer itself.
In stockShips from France · priced in EUR (€274.81) · duties may applyReturn policy
The Bambu Lab AMS 2 Pro Kit for X1 and P1 series combines an AMS 2 Pro with the parts needed to connect it: a 4-pin cable, an AMS Hub, three PTFE tube connectors, and a switching adapter. The adapter powers the AMS 2 Pro's drying function on X1/P1 printers.
The AMS 2 Pro dries filament with active ventilation at 65°C and stores it in a hermetic enclosure. Its automatic ventilation helps dehumidify during drying, and the spools rotate automatically during the drying cycle for more uniform drying.
It uses a brushless servo feed motor and RFID filament synchronization. Filament tubes are accessible from the top without tools, and the ceramic filament inlets have a Vickers hardness of 1200. With six AMS 2 Pro units, the setup can print up to 24 colors or materials.
It checks today's price at every store, compares the alternatives and answers in about a minute.