Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The H2C Laser Full Combo is a closed, multi-material 3D printer with a 10W laser module built in, so one machine both prints and engraves or cuts. Its Vortek tool changer holds up to seven hotends with induction heating in about 8 seconds, and skips purge when a print uses fewer than seven filaments. A 350 °C nozzle, 120 °C build plate and actively heated chamber up to 65 °C handle ABS, ASA, PC, PA and fiber-filled filaments. It suits makerspaces, schools, designers and small shops that want printing and laser work without buying two machines; against single-purpose printers it trades a bigger footprint and more setup for that range.
In stockShips from Denmark · priced in DKK (DKK 20,999.00) · duties may applyReturn policy
The Bambu Lab H2C Laser Full Combo (10W) combines an enclosed multi-material 3D printer with a 10W laser module. The printer uses the Vortek hotend change system, which holds up to seven hotends. This lets it print in several materials with minimal waste. The laser module engraves and cuts on the same machine.
The 10W laser module engraves wood, leather, cardboard, anodized aluminum and similar materials. It also cuts thin sheets. Hotends are heated by induction in about 8 seconds. If a print uses fewer than seven filaments, no purge is needed between changes.
The nozzle reaches 350 °C, the build plate reaches 120 °C, and the chamber can be actively heated up to 65 °C. This supports printing in ABS, ASA, PC, PA and fiber-reinforced filaments. A Vision Encoder gives motion accuracy under 50 µm, and four cameras monitor the work. The chamber is enclosed and built from flame-retardant materials.
