Bambu Lab H2D Combo

The H2D Combo is the dual-extruder machine on Bambu's H2 platform, for printing two materials in one job without a tool change — the common reason people step up from a single-nozzle printer.

Combo bundles the printer with its AMS unit, so multi-colour and multi-material printing work out of the box rather than as a later upgrade.

Buying it from Forgely

Authorized Bambu Lab reseller. New, sealed retail stock with the full manufacturer warranty, bought from a shop in Utah you can walk back into.

See it printing first. We run these machines in the store, so you can watch the one you are considering actually print and hold the output before you decide.

We repair them too. Our technicians service Bambu printers in-house every week, so the advice you get before you buy comes from the bench rather than a catalogue.

Collect in Roy or Murray. No shipping wait and no freight damage. Printer stock moves daily, so call ahead and we will hold a unit for you.

Specifications

Build volume: Single Nozzle Printing: 325*320*325 mm³; Dual Nozzle Printing: 300*320*325 mm³; Total Volume for Two Nozzles: 350*320*325 mm³

Hotend: Max Nozzle Temperature 350 °C; Nozzle: Hardened Steel

Chamber: Active Chamber Heating: Supported; Max Temperature: 65 °C

Heated bed: Max Heatbed Temperature 120 ℃

Speed: Max Speed of Toolhead 1000 mm/s; Max Acceleration of Toolhead 20,000 mm/s²

Materials: PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA CF/GF, PPS, PPS CF/GF