
Bambu Lab H3C 9-Tool Changer 3D Printer with AMS System
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Bambu Lab H3C is a tool-changer 3D printer with nine dedicated PrintTools, each with its own filament path and heater. Swaptek switching takes as little as 6 seconds and purge waste drops to about 0.038 g, since no filament has to be retracted and reloaded. It pairs with the enclosed AMS 3H, which holds nine sealed spools, loads automatically and dries filament at up to 85°C. A 65°C heated chamber and a 350°C hotend put it in the league of multi-material machines that cost far more and switch far slower. It suits makers who print many colors or engineering materials and want to stop wasting filament on purges.
In stockReturn policy
The Bambu Lab H3C is a 9-tool changer 3D printer paired with the fully enclosed AMS 3H filament system. Each of its nine PrintTools keeps its own filament loaded, heated and ready, so the printer can switch materials in as little as 6 seconds and complete a tool change in 3.4 seconds. Purge waste can be as low as 0.038 g per change.
The AMS 3H has nine sealed slots with automatic loading and a built-in 85°C dryer. Two dedicated drying slots reach 85°C for drying PA, PC, PET, TPU and carbon-fiber filaments on demand or mid-print with selected materials. The printer has a 65°C actively heated chamber and nine hardened-steel nozzles that reach 350°C.
It prints PLA, TPU, carbon fiber nylon, ABS, PC, PA-CF and PET-CF. FlexFeed supports 1.75 mm and 2.85 mm filament, and travel speeds reach up to 1,400 mm/s with acceleration up to 25,000 mm/s². The H3C can carry different nozzle sizes from 0.2 mm to 0.8 mm at once and use CMYKW color mixing with five PLA Palette filaments. Optional CraftTools add cutting, drawing, debossing and foil-transfer.