This is a replacement hotend for the Bambu Lab H2D, H2S, H2C (left side), X2D and P2S 3D printers. It comes in hardened steel or stainless steel, with nozzle sizes from 0.2 mm to 0.8 mm.
The heating assembly separates the thermal and electronic parts of the hotend. To remove or install it, unlock the latch. On the H2D, the dual-nozzle function currently supports only nozzles of the same type and size.
A 0.4 mm High Flow version is also offered. Its optimized melt zone raises volumetric speed and cuts print time, and the effect grows with larger models and heavy infill. The extrusion is meant to stay consistent, which keeps edges crisp and surfaces smooth.
- Compatibility
- Bambu Lab H2D, H2S, H2C (left side), X2D, P2S
- Material
- Hardened steel or stainless steel
- Nozzle sizes
- 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
- 0.2 mm nozzle
- Stainless steel. Used for small, intricate models such as miniatures, intricate logos and text.
- 0.4 mm nozzle
- Hardened steel. Used for everyday printing, balancing speed and quality: molds, toys, mechanical parts, decorative objects.
- 0.6 mm nozzle
- Hardened steel. Faster speeds and high-performance filaments, with some decrease in resolution. Used for large structural parts, household functional parts, industrial or engineering parts and high-st
- 0.8 mm nozzle
- Hardened steel. Faster speeds and high-performance filaments, with some decrease in resolution. Used for large structural parts, household functional parts, industrial or engineering parts and high-st
- High Flow nozzle
- 0.4 mm, hardened steel
- High Flow speed
- Up to 62.5% higher max volumetric speed (tested with ABS, 240 mm single-wall cylinder, 0.2 mm layer height, 1.0 mm outer wall, 280℃, spiral vase mode)
- High Flow print time
- Up to 30% shorter (tested with PLA Basic, 15% infill, 300x300x300 mm cube)
- Installation
- Quick-swap design with a latch