Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Bambu Lab P2S is an enclosed CoreXY-style 3D printer with a 256 x 256 x 256 mm build volume, a refreshed 5-inch touchscreen and second-generation UI, AI failure detection and adaptive cooling. Bundled with the AMS 2 Pro, it can run multi-color and multi-material prints with up to 20 colors when several AMS units are chained, and the kit adds a Revopoint Inspire 3D scanner and filament. It suits makers who want fast, hands-off multi-color printing in a closed chamber rather than an open-frame bed-slinger. Against its predecessor and open-frame rivals, the enclosure and AMS integration are the main draws; the trade-off is a higher entry cost and more setup than a single-color machine.
In stockReturn policy
The Bambu Lab P2S is an enclosed 3D printer with a 256 x 256 x 256 mm build volume. This bundle pairs it with the AMS 2 Pro automatic material system, a Revopoint Inspire 3D scanner and filaments. With multiple AMS units connected, it can print in up to 20 colors.
The P2S has a 5-inch touchscreen with a second-generation interface. AI failure detection uses a 2 TOPS NPU and computer vision to spot spaghetti failures, nozzle blobbing and print start errors. An eddy current sensor handles automatic flow dynamics calibration. The PMSM servo extruder with DynaSense delivers up to 8.5 kg of extrusion force and samples at 20 kHz in real time. The extruder gears and nozzles are hardened steel, for engineering-grade and fiber-reinforced filaments.
The hotend swaps in about 30 seconds with a single clip and no wiring. A cold-air intake in the adaptive airflow cooling system helps with low-temperature filaments and overhangs, even with the door closed. A 1080P camera and LED lighting support remote viewing and timelapse recording. The AMS 2 Pro has an active venting system that dries filament 30% faster than sealed heating.
