The Basepump RB750 is a water powered backup sump pump for homes with normal volumes of sump water. It runs on municipal water pressure, so it needs no battery, wires or charger. It works independently of the main pump and operates automatically, whether you are home or away.
When water rises above the normal high water level, the float lifts and opens a valve. Municipal water flows through the ejector and creates suction that draws sump water out of the pit and discharges it outdoors. A pre-set timing control keeps the pump running until the sump is completely drained. Float position and cycle timing are both adjustable.
The pump mounts on the ceiling, high above the sump pit, so it does not work against downward water pressure. This also keeps it away from corrosion, clogging, debris and scale in the pit. It has no motors, turbines or other mechanical parts, and the hydraulic float has no electronic components. The ejector is heavy duty, corrosion resistant polypropylene. Each unit is hand-assembled and hand-tested in the USA.
- Pump type
- Water powered backup sump pump, ceiling mounted
- Material
- Polypropylene ejector, corrosion resistant
- Efficiency
- 1 gallon of municipal water removes 2 gallons of sump water at 10' of lift and 90 PSI
- Pumping rate
- At 10' lift: 700 GPH at 40 PSI, 750 GPH at 60 PSI, 800 GPH at 80 PSI, 900 GPH at 90 PSI
- Water pressure
- 40 to 90 PSI required at the ejector
- Water flow
- Must fill a 5 gallon bucket within 40 seconds from the home's hose spigot
- Pipe connection
- Fits 1/2" or 3/4" pipes; adapters included
- Pipe compatibility
- Full-flow copper or equivalent (PVC, CPVC or PEX if approved locally); not for galvanized iron pipes
- Water line
- Tee in before any flow-restricting devices such as stop and waste valves, pressure regulators, water conditioners or filters; water meter must be minimum 3/4" standard
- Sump pit size
- Works in pits as small as 10" diameter; can be installed in radon-sealed pits
- Operation
- Fully automatic; unlimited running time as long as water supply is available
- Adjustments
- Float positioning and cycle timing control
- Additional pipes needed
- Suction pipe: 1" PVC, schedule 40 white, 10' long. Cold water pipe: 1/2" or 3/4" PEX, copper or CPVC tubing
- In the box
- RB750 ejector, check valve, float unit, hydraulic transfer tube, suction screen, water alarm with 9V battery, 3 ft. flexible PVC discharge hose, mounting clamps, screws and fittings, Velcro cable tie
- Water alarm
- Has relay outputs for connection to a security system or auto-dialer
- Weight
- 8 lbs. shipping weight
- Warranty
- 5 year limited manufacturer's warranty
- Made in
- Hand-assembled and hand-tested in the USA