The B-1 DARK EDITION is a large-diaphragm condenser microphone with a 1" gold-sputtered single diaphragm and a cardioid pickup pattern. It is made to work as a main or support microphone in studio and live settings, for vocals, acoustic instruments and voice overs.
It uses a pressure-gradient transducer with a shock-mounted capsule and a transformerless FET input. A low-cut filter at 75 Hz with a 6 dB per octave slope and -10 dB input attenuation are both switchable. The body is nickel-plated brass.
The microphone connects through a gold-plated 3-pin XLR output and runs on +48 V phantom power at 3 mA. A suspension mount, windscreen and aluminum transport case are included.
- Transducer
- Condenser, 1" single diaphragm
- Operating principle
- Pressure gradient
- Polar pattern
- Cardioid
- Connection
- Gold-plated 3-pin XLR
- Frequency range
- 20 Hz – 20 kHz
- Open circuit voltage
- -34 ±2 dBV at 1 kHz (0 dBV = 1 V/Pa)
- Sensitivity
- 20 mV/Pa
- Level attenuation
- -10 dB, switchable
- Low-cut filter
- 6 dB/octave at 75 Hz, switchable
- Max SPL
- 138 dB (0 dB), 148 dB (-10 dB) at 1% THD, 1 kHz
- Equivalent SPL
- 13 dB-A (IEC 268-4)
- Signal-to-noise ratio
- 81 dB A-weighted (re 1 Pa)
- Nominal impedance