The Behringer NX3000 is a two-channel Class-D power amplifier rated at 3,000 watts peak, built into a 19-inch rack-mount chassis about 9 inches deep. It stands out for its low price per watt, onboard DSP with presets and limiting, and a lightweight design for a PA amp. It suits bar bands, DJs, mobile rigs and installs that need loud output on a budget rather than audiophile refinement.
In stock
In stockSold by AdoramaReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
In stock
In stock
In stock
Availability unknownShips from abroad · duties may apply
Availability unknown
Availability unknownSold by sweetwatersound
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknownShips from Australia · duties may apply
Availability unknownMade for another market
Also available at
Store links may earn us a commission. Some prices via Klarna.
Lowest price we've seen: $186.00 on Oct 28 at Music Store US. Tracked across 13 stores since Oct 28.
Owners generally see the NX3000 as a lot of power and DSP for the price, and many use it for bands, DJs and installed PA. Complaints center on the peak-versus-continuous wattage gap, fan noise and the learning curve of the DSP menus.
The Behringer NX3000 is a 2-channel PA power amplifier rated at 3,000 watts. It delivers 2 x 1500 W at 2 ohms, 2 x 900 W at 4 ohms, and 3,000 W into 4 ohms in bridge mode. It weighs 7.7 lbs (3.5 kg) and mounts in a rack.
It uses high-density Class-D amplification with a switch-mode power supply. This design runs cooler and does not need large heat sinks or heavy toroid transformers. "Zero-Attack" limiters provide overload protection. SmartSense impedance compensation keeps the frequency response linear at any speaker load impedance. The amp also has a higher damping factor for better control of the loudspeaker, especially at low frequencies.
The front panel has a Power button and Power LED. Each channel has a positive-detent Gain control, a Signal LED, and a Limit LED that lights when the amp is at full capacity. The rear panel has combo XLR and 1/4" TRS inputs for balanced or unbalanced sources, and twist-lock speaker sockets. Rear switches select dual mono, stereo or mono bridge mode. A built-in crossover switch sets Full-Range mode, which sends unfiltered output to the speakers, or Bi-amp mode, which sends only low-frequency content (100 Hz).
It checks today's price at every store, compares the alternatives and answers in about a minute.






