The Behringer Xenyx X1832USB is an analog mixer with 18 inputs and a 3/2-bus design. It has 6 XENYX mic preamps with phantom power. Each mono channel has a one-knob compressor with an LED that shows when the compression threshold is reached, plus a British-style 3-band EQ with a semi-parametric mid band.
A 24-bit, dual-engine Multi-FX processor has 16 editable presets, including reverb, chorus, flanger, delay, pitch shifter and multi-effects. It also has a Tap function and storable user settings. A 9-band stereo graphic EQ works on monitor or main mixes, and the FBQ Feedback Detection System shows critical frequencies. XPQ 3D stereo surround and a Voice Canceller function are also included.
A built-in stereo USB/audio interface connects directly to a computer. Free recording, editing and podcasting software, 150 instrument/effect plug-ins and a low-latency driver can be downloaded from behringer.com. The mixer uses a switching power supply that accepts 100 - 240 V.
- Type
- Analog mixer
- Channels
- 14
- Mic preamps
- 6 x XLR, phantom powered, 130 dB dynamic range, bandwidth from below 10 Hz to above 200 kHz
- Line inputs
- 8 x TRS, 2 x RCA
- Other I/O
- 2 x RCA
- Main outputs
- 2 x XLR, 6 x TRS
- Headphones
- 1 x 1/4"
- Send/return
- 2 x 1/4"
- Inserts
- On each mono channel
- Busses/groups
- 2 x Bus, with 2 subgroups and separate outputs
- Aux sends
- 3 per channel: 1 pre fader, 1 pre/post fader switchable, 1 post fader (internal FX or external send)