Compared across 13 stores. Prices are checked against each store and labelled with when. Store links may earn us a commission.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A benchtop combination sander with a 100mm wide belt and a 203mm disc, driven by a 500W direct-drive induction motor. The steel body and 5mm aluminium disc keep vibration low and the disc flat under pressure, and the belt arm tilts upright for vertical sanding. It suits woodworkers shaping and profiling hard, soft and composite woods who want one machine for edges, curves and end grain. Against belt-driven rivals it runs quieter in maintenance terms and keeps speed under load, though it lacks the variable speed and larger tables of bigger floor models.
In stockSold by worxtools
In stockSold by WORX
In stock
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Availability unknown
Store links may earn us a commission.
Lowest price we've seen: $139.99 on Nov 14 at Walmart. Tracked across 13 stores since Nov 14.
Rated 4.7 out of 5 from 11 ratings. Owners report solid, low-vibration running and accurate tracking on the belt.
This belt and disc sander shapes, sands and profiles hard, soft and composite woods, working on both cross grain and end grain. A 500W induction motor directly drives both the disc and the belt. It is maintenance-free and holds a constant speed under load, giving 25% greater sanding efficiency than standard belt-driven units. The steel body adds strength and stiffness to keep vibration low.
The 100mm wide belt runs on two heavy-duty steel rollers. It can be micro-adjusted to track left or right, and a tension locking lever releases and replaces it quickly. The belt arm tilts upright through 90° for vertical sanding. The cast aluminium worktable tilts through 45° and locks in position using the graduated scale.
The 203mm disc is made of 5mm thick aluminium plate that does not flex under pressure, and it accepts self-adhesive sanding discs. It is mainly used for shaping corners, outside curves and end grain. Its worktable locks from 0 to 45°. The supplied mitre gauge, used with either worktable, allows sanding of bevels, mitres and compound mitres. Two 37mm dust ports draw dust from the belt and disc at the source.
