This adapter lets Black and Decker 20V lithium-ion batteries power Hercules 20V cordless tools from Harbor Freight. Both platforms run at 20V, so the adapter changes the fitting and does not convert voltage. It works in one direction only: Black and Decker batteries powering Hercules tools.
The housing is injection-molded ABS with copper terminals and 5 mm² internal wiring. It is rated for 40A continuous current, with 80A peak at 18VDC for up to 2 seconds. A built-in battery management system (BMS) cuts power before the battery is drained too far.
The adapter only powers tools. It cannot charge batteries and must never be connected to a charger. Remove the battery from the adapter before charging, and charge it on the original charger for your Black and Decker 20V battery. Compatibility can vary by exact battery and tool model. The Hercules Heat Gun works only with a battery of 5Ah or more, for short periods of about 30 seconds at a time. The Hercules Band Saw is not currently compatible.
- Fits battery
- Black and Decker 20V (lithium-ion)
- Runs tools
- Hercules 20V (lithium-ion) from Harbor Freight
- Voltage
- 20V battery to 20V tool
- Housing
- Injection-molded ABS
- Terminals
- Copper
- Current rating
- 40A continuous (80A peak at 18VDC for up to 2 seconds); 720 W continuous at 18V nominal
- Internal wiring
- 5 mm²
- Protection
- Built-in BMS
- USB port
- No
- Weight
- 125 g (4.4 oz / 0.28 lb)
- Colors
- Red, Yellow, Black
- Operating temperature
- -10 °C to 50 °C (14 °F to 122 °F)
- Operating humidity
- 5–95% RH
- Charging
- Cannot charge batteries; never connect to a charger
- Known limits
- Heat Gun needs a 5Ah or larger battery and short use; Band Saw not compatible
- In the box
- Battery adapter
- Warranty
- 12 months