The Bobrick B-5806x36 is a commercial grab bar with a concealed-mount design. It is 36 in (914 mm) long and made from 1-1/4 in (32 mm) diameter tubing. It is the 36-inch length in Bobrick's 1-1/4 in concealed-mount B-5806 series.
The bar is made of 18-gauge (1.2 mm) Type 304 stainless steel with a satin finish. Its mounting flange is 1/8 in (3 mm) thick Type 304 stainless steel with screw holes for concealed anchors. A snap-on cover made of 22-gauge (0.8 mm) stainless steel fully conceals the mounting hardware.
The bar has a 900 lb (408 kg) load rating, which exceeds ADA structural requirements. It meets ADA §609.2 graspability and §609.3 wall clearance. At 36 in, it is the minimum length required for the rear wall of a standard ADA-accessible toilet stall under §604.5.2.
- Model
- Bobrick B-5806x36
- Length
- 36 in (914 mm)
- Tube diameter
- 1-1/4 in (32 mm)
- Material
- Type 304 stainless steel
- Bar gauge
- 18-gauge (1.2 mm)
- Finish
- Satin
- Mounting
- Concealed mount
- Flange thickness
- 1/8 in (3 mm) Type 304 stainless steel
- Flange size
- 2 in W × 3-1/8 in H (50 × 80 mm)
- Flange cover
- Snap-on, 22-gauge (0.8 mm) stainless steel
- Cover diameter
- 3-1/4 in (85 mm)
- Load rating
- 900 lb (408 kg)
- Compliance
- ADA §609.2 graspability and §609.3 wall clearance
- Related model
- B-5806.99x36 has the same size with a peened (slip-resistant) surface