The Bosch GET75-6N is a 6-inch dual-mode random orbit sander. It switches between a standard random-orbit mode and a direct-drive, eccentric-orbit turbo mode. Standard mode is for normal stock removal and fine finishing. Turbo mode removes stock at 3x the rate of standard mode, as an alternative to a belt sander.
The die-cast aluminum gear housing has a dual-bearing pad mount that lessens wobble and vibration. An integral pad-dampening system helps prevent swirl marks. The soft microcellular hook-and-loop backing pad and multihole pad system work with a wide variety of abrasive discs. Constant speed helps maintain speed under load.
The slim, tapered top grip has a soft-grip design to help ease hand fatigue. The auxiliary handle mounts on either side of the tool. A removable pad guard helps keep the pad from touching surfaces in front of or alongside the workpiece. The built-in dust port and large channels in the pads pull debris through to a vacuum. An extension dust tube and VAC024 Vacuum Hose Adapter connect to 35mm, 1-1/4 inch and 1-1/2 inch hoses.
- Pad size
- 6 in.
- Modes
- Standard random-orbit and turbo direct-drive eccentric-orbit
- Weight
- 5.7 lb
- Height
- 5.5
- Length
- 15
- Switch
- Slide on-off switch with lock-on
- Handle type
- Barrel
- Housing
- Die-cast aluminum gear housing
- Backing pad
- Microcellular hook-and-loop
- Dust collection
- Built-in dust port; fits 35mm, 1-1/4 in. and 1-1/2 in. hoses
- In the box
- 6 in. dual-mode random orbit sander, extension dust tube, VAC024 Vacuum Hose Adapter