This kit pairs a cordless random orbital sander and a cordless palm orbital sander with a cordless 10 litre dust extractor. It is a cable-free sanding setup, so there are no sockets or extension leads to deal with. The extractor captures dust at the source and filters 99.5% of fine particles.
Both sanders have maintenance-free brushless motors and run on 20V, 2.0Ah batteries with chargers. The soft start motors build up speed gradually. Speed is variable from 4,000 to 10,000rpm and is controlled with the paddle switches. The bodies are lightweight and low profile, with low vibration and low noise. The sanders are designed for ultra-fine sanding and finishing, and they reach into tight corners and hard-to-reach areas such as windows, doors and frames.
The dust extractor has a brushless motor and runs on 2 x 18V 4.0Ah batteries with a charger. Its four-fold filtration system catches 99.5% of particles down to 0.3 microns and outperforms L-Class filter requirements. It has an impact resistant body and sturdy castor wheels.
- Sander motors
- Brushless, with soft start
- Sander power
- 20V, supplied with 2.0Ah batteries and chargers
- Speed range
- 4,000 to 10,000rpm, variable
- Random sander
- 2.5mm orbit, 125mm backing pad
- Palm sander
- 1.5mm orbit, 81mm x 133mm backing pad
- Extractor capacity
- 10 litres
- Extractor power
- 36V, supplied with 2 x 18V 4.0Ah batteries and charger
- Filtration
- Four-fold system, 99.5% of particles down to 0.3 microns
- Extractor body
- Impact resistant, with castor wheels
- Extractor supplied with