Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A two-sander kit: a 150mm/125mm random orbital sander with a 5.0mm orbit for stock removal, and a 100mm x 152mm delta sander with a 3.0mm orbit for corners and profiles. Both use 350W brushless motors that hold speed under load, run 4,000 to 10,000rpm, and add soft start and an electronic brake. The 25-litre M class extractor captures fine dust from wood, MDF, paint, fillers and plaster. It suits workshop and site users who want one hose-fed system for both flat and detail sanding, and it competes with separate sander-plus-extractor purchases on dust class and motor type rather than on orbit size alone.
In stockShips from the UK · duties may applyReturn policy
This set pairs a brushless random orbital sander and a brushless delta orbital sander with a 25L M class dust extractor. The extractor captures 99.9% of dust. It is suited to wood dust, MDF, paint, fillers, plaster, masonry and more.
Both sanders have low-vibration, low-noise, lightweight, low-profile bodies and can be used flat, vertically or overhead. The random orbital sander runs in a 5.0mm orbit for a high material removal rate and consistent finishes. The delta orbital sander runs in a 3.0mm orbit for fine sanding and finishing. It reaches tight corners, profiles and hard-to-reach areas, such as windows, doors and frames.
The 350W brushless motors hold a constant speed under load. They have a soft start and an electronic brake that stops them instantly. Speed runs from 4,000 to 10,000rpm. The paddle levers control speed between 4,000rpm and the current maximum, which is set with the + and - buttons and shown by LED indicators.
