Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a two-part kit: a brushless random orbital sander paired with a 10-litre dust extractor that starts and stops with the tool. The sander runs a 5.0mm orbit and a 350W brushless motor at 4,000 to 10,000rpm, holding speed under load, and ships with both 125mm and 150mm backing pads. The extractor filters down to 0.3 micron and keeps running five seconds after the sander stops to clear the hose. It suits woodworkers and refinishers who sand for long sessions and want low vibration (3.07 m/s²) and low noise (80 dB LpA) with clean air. Against bare sanders, the auto-start extraction and swivel dust port are the draw; the trade-off is the weight and bulk of a hose-connected setup.
In stockShips from the UK · duties may applyReturn policy
Rated 4.8 out of 5 across 345 ratings, owners praise the dust capture and smooth, low-vibration running. The auto-start extractor and swivel hose port come up often as the reason it beats a sander alone.
This kit pairs a brushless random orbital sander with a 10 litre dust extractor for dust-free sanding. The extractor captures particles down to 0.3 micron. It starts automatically when the sander is switched on and runs for 5 more seconds after the sander stops, to clear dust from the hose.
The sander has a 350W brushless motor that holds a constant speed under heavy load. It runs in a 5.0mm orbit and comes with both 150mm and 125mm backing pads. Speed ranges from 4,000 to 10,000rpm. A paddle lever controls speed between 4,000rpm and the maximum, which is set with the + and - buttons and LED indicators. The rear dust port has a 360° swivel fitting, so the hose does not kink as you move the sander. Used with net abrasive discs, the centralized extraction system allows dust-free sanding.
The extractor has four-stage HEPA filtration: a fleece filter bag, a filter cartridge, a filter basket and a filter sponge. Its 1200W motor produces 260 mbar of suction, with variable air-flow control to suit different floor surfaces. It is compact and lightweight, and it can be carried with one hand, including the hose and accessories, thanks to onboard tool storage.
