The BTECH GMRS-V2 is a handheld GMRS two-way radio with IP54 protection against dust and water. It is repeater capable and has 200 customizable channels. It also works as a dual band (VHF/UHF) scanning receiver and has a built-in FM radio.
One built-in receiver can monitor two channels at once (Dual Watch). The radio can also be set to monitor a single channel. It has two push-to-talk buttons: the upper PTT transmits on the upper display, and the lower PTT transmits on the lower display.
The radio supports all CTCSS and DCS tones and works with FRS/GMRS radios. It can be programmed with CHIRP using a PC03 cable, which is sold separately. It charges over USB-C and uses the Kenwood K1 2-pin accessory jack.
- Power output
- 5W / 0.5W
- Frequency range
- GMRS 462.5500 to 467.7250 MHz (Rx & Tx); UHF and VHF (scanning and receiving)
- Channels
- 200 total, programmable with GMRS, NOAA, or VHF/UHF scanner channels
- Water/dust rating
- IP54
- Tones
- All CTCSS and DCS tones supported
- Features
- Dual Watch, DTMF keypad, VOX hands-free operation, SOS alarm, built-in flashlight, built-in FM radio
- Scanning
- Adjustable scanning modes, nuisance channel scan skip, adjustable squelch
- Charging
- USB-C; full charge in 4 to 6 hours
- Battery
- 1800mAh; up to 14 hours of normal use
- Accessory jack
- Kenwood K1 2-pin, compatible with Kenwood K1 accessories
- Programming
- Computer programmable with CHIRP; PC03 cable recommended (not included)
- Range
- Repeater use: up to 100 miles; hill to valley: 36 miles; open flat terrain: 3 to 5 miles; urban or outside buildings: about 1 mile. Varies with topography.
- In the box
- 1 radio, 1 removable antenna, 1 dual PTT earpiece, 1 x 1800mAh battery, 1 belt clip, 1 wall charger with radio dock, 1 user manual