

The Bunn BX-B is a 10-cup drip brewer built around a always-hot water tank, so it can brew a full pot in about three minutes with no warm-up wait. You fill the reservoir once at setup, let it heat for roughly 15 minutes, then each brew pours cold water in to push the hot water through the grounds. It suits people who drink pot after pot and want commercial-style speed at home. Against standard drip brewers it is faster and keeps water at temperature, but it holds water hot around the clock, has no programmable timer or auto-off, and needs a dedicated outlet.
In stockShips from Canada · duties may applyReturn policy
Owners value the speed and consistently hot coffee, and many keep theirs for years. Complaints center on the always-hot tank, the lack of a timer, and the need to pour water in for every pot.
The Bunn B10 is a 10-cup home and office coffee maker modeled after Bunn's commercial brewers. It brews up to 10 cups in about three minutes. A water reservoir keeps hot water on standby, so a pot can brew without the usual wait.
To set it up, add up to 10 cups of cold water to the reservoir and turn the power switch on. The initial heating takes about 15 minutes. When you brew, the cold water you pour in displaces the hot water already in the system. The hot water goes to the filter basket and flows through the grounds. The new cold water then heats for the next pot.
Two switches run the whole machine, and there are no timers or clocks. The side power switch is the Vacation switch. Turn it off before an absence longer than 2 days, and allow 15 minutes of heating when you turn it back on. A lit switch on the front turns the carafe warming plate on or off.






