
Cadence 12" 300 Watt RMS 2-Ohm Active Ported Subwoofer Enclosure TUBE12VA
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The Cadence TUBE12VA is a 12-inch powered subwoofer in a cylindrical bass-reflex enclosure with a built-in Class D amplifier rated 300W RMS and 700W peak. It needs no external amp: RCA inputs, a 30–150Hz low-pass filter and a 25A fuse are on the amp panel, and the 2-ohm driver uses a 2-inch high-temp voice coil. The tube shape saves space versus a boxed sub and suits hatchbacks, trucks and tight trunks where a cube won't fit. Against typical powered tubes it offers a larger 12-inch driver and a wider filter range, but it is a single-input bass unit, so it adds low end to an existing system rather than replacing full-range speakers.
In stockReturn policy
The Cadence TUBE12VA is a 12-inch amplified subwoofer built into a cylindrical, ported enclosure for car audio. It has a built-in Class D amplifier that delivers 300 watts RMS and 700 watts peak, so no external amp is needed. The 12-inch driver uses a laminated black paper cone, a butyl rubber surround and a 2-inch high-temperature voice coil.
The bass-reflex tube shape is designed to keep air moving and support output efficiency. Frequency response runs from 32 Hz to 500 Hz, with 92 dB sensitivity at 1W/1m and a 2-ohm impedance. The amp panel carries RCA inputs, a 30–150 Hz low-pass filter for tuning and a 25A fuse.
The enclosure is wrapped in black automotive carpet with orange Cadence embroidery and finished with a metal mesh grille and a bright orange rear port accent. It is intended for mounting in the trunk or rear seat area. The unit measures 13.1" x 26.0" x 13.1" (333 x 660 x 333 mm) and weighs 29.34 lbs (13.3 kg).
It checks today's price at every store, compares the alternatives and answers in about a minute.
